Dahua JRC-27F, User Manual

Page: 178 / 415

User's Manual
160
Parameter Description
ANR
You can set the ANR (auto network resume) function.
●
The IPC continues recording once the NVR and IPC connection
fails. After the network becomes normal, the NVR can download
recording files while it is disconnected from the IPC. This is to help
protect against data loss from the current IPD channel that is
connected.
●
Set the maximum recording upload period. If the offline period is
longer than the period you set, IPC will only upload the recording
file during the specified period.
Make sure that SD card is installed and the recording function is
enabled on the IPC.
Period
Set a period during which the configured recording setting is active.
The system only activates the alarm in the defined period.
Copy to Click Copy to to copy the settings to other channels.
Figure 5-69 Period
Step 3 Set one or more recording types from
General
,
Motion
(motion detection),
Alarm
,
M&A
(motion detection and alarm), Intelligent and Alarm .
Figure 5-70 Recording type
Step 4 Set recording period.
If you have added a holiday, you can set the recording period for the holiday.