Installation and Configuration Manual
3
2
Installation
This chapter introduces the standard entrance and exit scenarios with 413 series cameras. For details
on camera installation, see Table 2-1.
Single-camera Solution Description
The card-free system is an entrance and exit management system based on vehicle license plates. The
license plate is extracted by the entrance and exit cameras through video analysis during vehicle
passing. The camera capture effect directly affects the system charing. In actual use, video capture is
used to trigger the radar to prevent smashing in some entrance and exit passages, instead of the
traditional coil solution. This solution features no damage to the road surface, simple wiring between
devices, and convenient site construction, which greatly reduces the construction difficulty and
shortens the construction period and cost.
Device installation diagram
The total length of the refuge island in the device installation area is 6500 mm, which can be
adjusted according to the actual situation on site.
The two barrier gates are installed on both sides of the refuge island in parallel.
