35
Parameter
Description
Mode
Network mode, including static, and DHCP.
●
Static
: Manually set IP, subnet mask, and gateway.
●
DHCP
: Automatically acquire IP. At this moment, IP, subnet mask,
and gateway cannot be set.
MAC Address
MAC address of the host.
IP Version
Includes
IPv4
, and
IPv6
. The IP address of both versions can be
accessed.
IP Address
Device IP Address.
Subnet Mask
The corresponding subnet mask of device IP address.
Default Gateway
Corresponding gateway of device IP address.
Preferred DNS
IP address of DNS server.
Alternate DNS
Alternative IP address of DNS server.
Step 3
Click
Confirm
.
5.4.3.2 Port
You can set the maximum number, and value of the ports.
Step 1
Select
Setting
>
Network
>
Port
.
Figure 5-30 Port
Step 2
Configure each port value of the Camera.
Table 5-18 Connection parameters description
Parameter
Description
Max Connection
The maximum number of clients (such as web client, and platform
client) that are allowed to access the Camera simultaneously. It is 10 by
default.
TCP Port
Protocol communication port. It is 37777 by default.
UDP Port
User data packet protocol port. It is 37778 by default.
HTTP Port
HTTP communication port. It is 80 by default.
RTSP Port
Media streaming control port. It is 554 by default.
HTTPS Port
HTTPS communication port. It is 443 by default.
Step 3
Click
Confirm
.