9
4.2 Changing IP Address
You can acquire and change the IP address of devices accessed through wired network. This section
uses changing IP address with ConfigTool as the example.
Step 1
Get ConfigTool from technical support and install it on your local computer.
Step 2
Double-click
.
Step 3
Click
Modify IP
on the homepage.
Step 4
Select the device(s) whose IP need(s) to be changed.
●
Change one IP address: Click
Edit
corresponding to the device.
●
Change IP addresses in batches: Select the devices, and then click
Batch
Modify IP
.
Step 5
Set mode, IP, subnet mask and gateway.
Step 6
Click
OK
.
Figure 4-2 Change IP addresses in batches