Quick Start Guide
4
2 Network Configuration
Device initialization and IP setting can be finished with the ConfigTool or on web page. For more
information, see web operation manual.
●
Device initialization is available on select models, and it is required at first-time use and after
device is reset.
●
Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stay on the same network segment.
●
Plan usable network segment properly to connect the device to the network.
●
The following figures are for reference only.
2.1 Initializing the Camera
Step 1
Double-click ConfigTool.exe to open the tool.
Step 2
Click
Modify IP
.
Step 3
Click
Search Setting
.
Figure 2-1 Setting
Step 4
Select the searching way.
●
Current Segment Search (default)
Select the
Current Segment Search
checkbox. Enter the username in the
Username
box and the password in the
Password
box. The system will search for devices
accordingly.
●
Other Segment Search
Select the
Other Segment Search
checkbox. Enter IP address in the
Start IP
box and
End IP
box respectively. Enter username and password. The system will search for
devices accordingly.
●
If you select the
Current Segment Search
checkbox and the
Other Segment Search
checkbox together, the system searches for devices under both conditions.
●
Enter username and the password when you want to change IP, configure the system,
