Dahua IPC-HFW2431T-ZS-S2 Operation Manual Download

Page: 96 / 247

Parameter

Description

Enable ARP/Ping to set IP

address service

Select the check box, get the camera MAC address, and then you can

modify and configure the device IP address with ARP/ping command.
This is enabled by default. During reboot, you will have no more than 2

minutes to configure the device IP address by a ping packet with

certain length, the server will be turned off in 2 minutes, or it will be

turned off immediately after the IP address is successfully configured. If

this is not enabled, the IP address cannot be configured with ping

packet.
A demonstration of configuring IP address with ARP/Ping.
1. Keep the camera that needs to be configured and the PC within the

same local network, and then get a usable IP address.

2. Get the MAC address of the camera from device label.
3. Open command editor on the PC and enter the following

command.

4. Restart the camera.
5. Check the PC command line, if information such as Reply from

192.168.0.125… is displayed, the configuration succeeds, and you

can turn it off then.

6. Enter http

://(IP address

) in the browser address bar to log in.

Step 3

Click Save.

4.6.2 Port

Configure the port numbers and the maximum number of users (includes web, platform client, and

mobile phone client) that can connect to the device simultaneously.

Procedure

Step 1

Select Setting > Network > Port.

Operation Manual

Summary of Contents for IPC-HFW2431T-ZS-S2
























































































































































































































































Search results

Summary of Contents for IPC-HFW2431T-ZS-S2

Reviews:

Related manuals for IPC-HFW2431T-ZS-S2

Brands by name

Popular brands

Dahua IPC-HFW2431T-ZS-S2, Operation Manual

Search results

Summary of Contents for IPC-HFW2431T-ZS-S2

Reviews:

Related manuals for IPC-HFW2431T-ZS-S2

Brands by name

Popular brands