Figure 4-124 Add IP/MAC
Step 3
Configure parameters.
Table 4-43 Description of adding IP/MAC parameters
Parameter
Description
Rule Type
Select IP address, IP segment, MAC address or all IP addresses.
●
IP address: Select IP version and enter the IP address of the host to be
added.
●
IP segment: Select IP version and enter the start address and end
address of the segment to be added.
●
MAC address: Enter MAC address of the host to be added.
●
All IP addresses: Set all IP addresses in allowlist or restricted list.
Device All Ports
Set access ports. You can select all ports or the ports in defined areas.
●
Device all ports: Set all IP port in allowlist or Blocklist. When selecting
BlockList in Mode, and All IP Address in Rule Type, you cannot
select the Device All Ports check box.
●
Device start server port and Device end server port: Set Device start
server port and device end server port, and the range is 1–65535.
Device Start Server
Port
Device End Server Port
Step 4
Click OK , and the Firewall page is displayed.
Step 5
Click Save.
4.8.5 Peripheral
4.8.5.1 Serial Port Settings
Set the serial port of the external device.
Procedure
Step 1
Select Setting > System > Peripheral > Serial Port Setting.
Operation Manual
132
Summary of Contents for IPC-HFW2431T-ZS-S2
