manualshive.com logo in svg

Dahua IPC-HFW2431T-ZS-S2, Operation Manual

Share
Download
Dahua IPC-HFW2431T-ZS-S2 Operation Manual Download Page 107

2. Compile the two MIB files with MIB Builder.
3. Load the generated modules with MG-SOFT MIB Browser.
4. Enter the IP address of the device you need to manage in the MG-SOFT MIB Browser, and then

select version to search.

5. Unfold all the tree lists displayed in the MG-SOFT MIB Browser, and then you can view the

configuration information, video channel amount, audio channel amount, and software version.

Use PC with Windows OS and disable SNMP Trap service. The MG-SOFT MIB Browser will display

prompt when alarm is triggered.

4.6.8  Bonjour

Enable this function, and the OS and clients that support Bonjour would find the camera

automatically. You can have quick visit to the camera with Safari browser.

Bonjour is enabled by default.

Procedure

Step 1

Select Setting  > Network > Bonjour.

Figure 4-84 Bonjour

Step 2

Select the Enable  check box, and then configure server name.

Step 3

Click Save.

Results

In the OS and clients that support Bonjour, follow the steps below to visit the network camera with

Safari browser.
1. Click Show All Bookmarks  in Safari.
2. Enable Bonjour. The OS or client automatically detects the network cameras with Bonjour

enabled in the LAN.

3. Click the camera to visit the corresponding web page.

4.6.9  Multicast

When multiple users are previewing the device video image simultaneously through network, it

might fail due to limited bandwidth. You can solve this problem by setting up a multicast IP

(224.0.1.0–238.255.255.255) for the camera and adopt the multicast protocol.

Procedure

Step 1

Select Setting  > Network > Multicast.

Operation Manual

96

Summary of Contents for IPC-HFW2431T-ZS-S2
























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands