5
(OPTIONAL) For a cleaner installation, you may wish to run the camera cable through the
cable notches on the back on the wall mount:
If you are running the cable through the wall, feed it through the top cable notch, then
through the cable hole you drilled in the mounting surface.
If running the cable along the wall, feed the cable through both cable notches.
Secure the wall mount base to the mounting surface using the provided screws (4×).
Twist the wall mount cover clockwise onto the base. Adjust the angle of the camera before
fully tightening the wall mount cover.
(OPTIONAL) If you run the cables along the wall, you may use the included cable guides
with the cable guide screws and optional drywall anchors as needed.
Connect the included USB power adapter to the camera cable and connect to a nearby
power outlet.
Connecting to the DMSS App
Install the free mobile app on your smart phone:
Apple App Store: iDMSS
Google Play Store: gDMSS
Tap the iDMSS or the gDMSS icon to open the app.
Note:
Ensure your mobile device is connected to the same 2.4 GHz WiFi network that will
be used with for the camera. The camera does not work with 5 GHz WiFi networks.
Scan the QR code on the camera. If the QR code does not work, tap
Manually enter SN
and type the camera’s serial number. Check that the LED indicator on the camera is
flashing green.
Click
Next
.
Click
Join
to allow the DMSS app to join the camera’s hot spot.
Type a security password for the camera to initialize the camera. The initialization process
may take some time to complete.
Select the WiFi network on which the camera resides and type the password if required.
Tap
Next
and check the camera to check that the LED indicator is steady green. Then, tap
Next
again.
Type a descriptive name for the camera and configure the time setup.