Dahua HS4408-4ET-96, Quick Start Manual, Page: 19 / 24

5 Initializing and Adding the Device
5.1 Initializing the Device
●
You can use DoLynk Care app to scan the QR code of the Device, and then add and initialize the
Device when the Device is connected to Internet.
●
You can log in to the webpage to initialize the Device and modify the IP address when the
Device is not connected to Internet.
●
Device initialization is required for first-time use or after the Device has been reset.
●
DHCP Client is enabled by default. If no IP address is assigned, the default IP address can be
used. (See from the Device label, usually 192.168.1.110.)
●
Device initialization is available only when the Device and the computer are on the same
network segment.
●
Plan the network segment properly to connect the Device to the network.
●
Different models support different methods of local initialization. For details, see the technical
specifications.
●
Webpage initialization is only supported on partial models.
5.2 Webpage Initialization
You can log in to the Device through webpage for management and operation. For details, see the
web operation manual.
The Device has no initial password. You can set your password accroding to the webpage prompts
when you log in for the first time and initialize the Device.
5.3 Adding the Device
Quickly add the Device to the DoLynk Care by scanning the QR code or manually enter the SN on
the Device.
Procedure
Step 1 Download and turn on the DoLynk Care, and then tap+Add Device.
Figure 5-1 DoLynk Care app
For more details, see DoLynk Care User's Manual .
Step 2 Tap + on the upper-right corner of the Home screen, select Scan the Code to Add , and
then tap Next.
Quick Start Guide
12