Dahua HD IR Network Dome Camera Quick Start Guide
3
2
Device Installation
2.1
Install SD Card
Note
Please implement SD card installation when the device is equipped with SD card slot and it needs
to use SD card.
Please cut off the device power before installing SD card.
Step 1
Use cross screwdriver to remove the screw on the dome bottom, take down the compression cover
and take out the dome body.
Figure 2-1
Step 2
Use cross screwdriver to remove the screw on the dome body, and then open the dome body.
Step 3
As it is shown in Figure 2-2, find the SD card slot, adjust SD card direction and insert it into the card
slot to install it well.
