Dahua HDBW2831R-ZAS, Operation Manual

Page: 82 / 256

Operation Manual
69
Step 4 Click
Save
.
4.5.2.3.11 Configuring GPS Position
The image displays GPS position. When the overlay function enabled during intelligent rules
configuration, this function is enabled simultaneously.
Step 1
Select Setting > Camera > Video > Overlay > GDP Position .
Figure 4-64 GDP position
Step 2 Select the Enable checkbox, and then select the Mode to Auto or Manual .
●
Auto: The GPS positions the longitude and latitude automatically.
●
Manual: Enter the longitude and latitude manually.
Step 3 Move GPS position box to the position that you want in the image.
Step 4 Click Save .
4.5.2.3.12 Configuring Ranging
Configure camera height and the display time of overlay information. Click any point on the ground
that the pole is installed on the image, and the overlay information between camera and the
selected point is displayed.
Step 1
Select Setting > Camera > Video > Overlay > Ranging .