Dahua HDBW2831R-ZAS, Operation Manual

Page: 42 / 256

Operation Manual
29
Step 3 Select the power up motion.
When you select Auto , the system will perform the last motion that is executed for more
than 20 s before power-off.
Step 4 Click OK .
4.3.2.9 PTZ Limit
After setting PTZ limit, the camera can only rotate within the configured area.
Step 1
Select Setting > PTZ settings > Function > PTZ Limit .
Figure 4-16 PTZ limit
Step 2 Adjust the direction buttons, and then click Setting
①
to set the up line; click Setting
②
to set the down line.
Click
Live to view the configured up line and down line.
Step 3 Select the Enable checkbox to enable the PTZ limit function.
4.3.2.10 Time Task
After setting time task, the camera performs the motions during the configured period.
Prerequisites
You have configured the PTZ motions, including preset, scan, tour, and pattern.
Procedure
Step 1 Select Setting > PTZ settings > Function > Time Task .