Dahua HDBW2831R-ZAS, Operation Manual

Page: 141 / 256

Operation Manual
128
Figure 5-6 Record linkage
5.1.1.3 Snapshot Linkage
After snapshot linkage is configured, the system can automatically alarm and take snapshots when
an alarm is triggered.
After
Motion is enabled in Snapshot , the system takes snapshots when an alarm is triggered. For
querying and setting snapshot storage location, see "4.5.2.5 Path".
5.1.1.3.1 Setting Snapshot Plan
According to the configured snapshot plan, the system enables or disables snapshot at
corresponding time.
Step 1
Select
Setting
>
Storage
>
Schedule
>
Snapshot
.
Figure 5-7 Snapshot
Step 2 Select snapshot type and set time period.
Green represents normal snapshot plan (such as timing snapshot); yellow represents
motion snapshot plan (such as snapshot triggered by intelligent events); red represents
alarm snapshot plan (such as snapshot triggered by alarm-in).
●
Method one: Select snapshot type, such as Normal, and directly press and drag the left
mouse button to set time period for normal snapshot on the timeline.
●
Method two: Enter an actual time period.
1. Click Setting next to a day.