Dahua HCVR8204A-S3 User Manual Download Page 99

Page: 99 / 446

Figure 4-51 Analog Channel

Figure 4-52 Digital Channel

4.2.2.1 Instant playback

It is to playback the previous 5-60 minutes record of current channel.

Please go to the Main menu->Setting->->System->General to set instant playback

time.

The preview control function has the following features.



Support preview playback.



In the preview desktop, system can playback previous 5-60 minutes record of

current channel. Please go to the Main Menu->General to set instant

playback time.



Support drag and play function. You can use your mouse to select any

playback start time.



Support playback, pause and exit function.

Summary of Contents for HCVR8204A-S3































































































































































































































































































































































































































































Search results

Summary of Contents for HCVR8204A-S3

Reviews:

Dahua HCVR8204A-S3, User Manual, Page: 99 / 446

Search results

Summary of Contents for HCVR8204A-S3

Reviews: