5 Configuration of the temperature chamber and
humidity
The temperature and humidity camera can measure the ambient temperature and humidity and
display the value on the live interface.
Activate/Deactivate temperature and humidity
In the OSD menu (Figure 3-7), select
Advanced > Temp. and humidity
(Advanced > Temp.
& Humidity) to activate and deactivate the function. You can see the real-time temperature
and humidity in the image.
Set the temperature measurement mode
The temperature and humidity chamber supports temperature correction in strong light
outdoors. You can change the temperature measurement mode.
active
Temp. and humidity
(Temp. & Humidity).
select
Standard
(standard) or
Sunlight
(sunlight) in the
measurement mode
(
Measure Mode) to change the temperature measurement mode.
Standard
(Standard)
is set by default.
It is recommended to change the mode to
Standard
(standard) or
Sunlight
(sunlight) when
be used indoors or outdoors, respectively.
Adjust temperature and humidity display
select
Advanced > Temperature and humidity > Location
(Advanced > Temperature & Humidity > Location) in the OSD menu.
Check that the temperature and humidity function is activated.
Click the directional buttons on the PTZ menu to change the
location displayed.
Click on
To accept
(Enter) to save the settings.
twenty-one
Summary of Contents for HAC-HFW1801C
Page 27: ...connected device 27 ...
Page 38: ...Water protection measures 38 ...
