Installation 4
3
Installation
Make sure the mounting surface is strong enough to hold at least three times of the camera
weight.
The following figures are for reference only, and the actual product shall prevail.
Installing Model A
3.1
Model A installation
Figure 3-1
Table 3-1 Installation item list
No.
Item
No.
Item
No. Item
①
Mounting surface
②
Expansion bolt
③
Buckle
④
Pedestal
⑤
Self-tapping screw
⑥
Dome
Hold the dome
⑥
tightly and rotate the buckle
③
on the bottom of the pedestal
④
Step 1
toward the unlock sign to take the dome
⑥
off.
Confirm the position of screw holes (and the cable outlet hole if it needs to go through
Step 2
the mounting surface
①
) and drill them on the mounting surface
①
, and then insert the
expansion bolts
②
in the screw holes.
Align the screw holes on the pedestal
④
to those on the mounting surface
①
, and then
Step 3
pull the cable out through mounting surface or the side cable tray. Attach the pedestal
④
to the mounting surface
①
with the self-tapping screws
④
.
