1
1
Hardware Installation and Connection
Note: All the installation and operations here should conform to your local
electric safety rules.
1.1
Check Unpacked NVR
When you receive the NVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the NVR can protect most accidental
clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list. (Remote control is optional). Finally you can
remove the protective film of the NVR.
Note
Remote control is not a standard accessory and it is not included in the accessory bag.
1.2
About Front Panel and Rear Panel
For detailed information of the function keys in the front panel and the ports in the rear panel,
please refer to the
User’s Manual
included in the resource CD.
The model label in the front panel is very important; please check according to your purchase
order.
The label in the rear panel is very important too. Usually we need you to represent the serial
number when we provide the service after sales.
1.3
After Remove the Chassis
Please check the data cable, power cable, COM cable and main boar cable connection is secure
or not.
1.4
HDD Installation
You can refer to the
User’s Manual
for recommended HDD brand. Please follow the instructions
below to install hard disk. This series NVR has two SATA HDDs. Please use HDD of 7200rpm or
higher.
All the figurers listed below are for reference only. Slight difference may be found on the front or
rear panel.
1. Take the HDD bracket out
of the accessories bag and
then place the four gaskets to
the four holes. .
2. Place the HDD to the holes of
the bracket and then use the
screws to fix firmly.
3.
Secure the brackets of the two
sides on the HDD.
Summary of Contents for Forensic NVR0404FD-S
Page 1: ...Forensic NVR Quick Start Guide Version 2 2 0 ...
Page 29: ...25 Figure 2 37 ...
