Dahua DHI-NVR608R-64-4KS2, Quick Start Manual, Page: 22 / 33

17
Parameter Description
Period
Defines a period during which the configured recording setting is
active.
The system only activates the alarm in the defined period.
Copy to Click Copy to to copy the settings to other channels.
Step 3 Set the schedule by drawing or editing.
● Drawing: Press and hold the left button of the mouse and drag the mouse to draw
the period.
● Editing: Click
to configure the period and then click OK .
Step 4 Click Apply .
The configured record schedule can come into effect only when the auto record
function is enabled. For details to enable auto record,
see User’s Manual.
1.6 Configuring P2P Settings
You can use the QR code to connect a smart phone to the NVR for management.
Make sure that the NVR has been connected to the Internet, and if yes, in the Status box of
the P2P interface, it shows
Online
.
1.6.1 Enabling P2P Function
You need to enter P2P interface to enable P2P function and scan the QR code to download
the smart phone application.
Step 1 Select
Main Menu
>
NETWORK
>
P2P
.
Figure 1-18 P2P
Step 2 Click Enable to enable P2P function.