20
Type
Parameter
Description
Loop2
●
Not triggered
: No capture is triggered.
●
Rise Edge
: Capture is triggered when the
vehicle enters loop.
●
Fall Edge
: Capture is triggered when the
vehicle exits the loop.
When the scheme is
single_in1-snap
, then loop 2
cannot be set.
Max Pass Time
Set a time period, during which a vehicle enters the
first loop and triggers the second, the Camera only
takes snapshots for the first trigger.
Applicable for double loops.
Step 3
Click
Confirm
.
2.5.1.2 Intelligence
2.5.1.2.1 Configuring Intelligent Analysis
You can set vehicle recognition parameter, recognition mode, and some other functions.
Step 1
Select
Setting
>
ITC
>
Intelligence
>
Intelligent Analysis
.
Figure 2-23 Intelligent analysis
Step 2
Configure parameters.
Table 2-10 Intelligent analysis parameters description
Parameter
Description
Target Detection
Set the sensitivity of vehicle detection. The higher the value, the more
sensitive the detection.
AI Attribute Settings
Select parameters such as vehicle type, car series, vehicle sign and
vehicle color which can be recognized by the Camera.
