Dahua DHI-IPMECS-2201C, User Manual, Page: 12 / 34

User’s Manual
5
3
Basic Configuration
ConfigTool 3.1

This section is only applicable to the configuration and upgrade of access ANPR camera
(hereinafter referred to as "the Camera").

This section only introduces the general operations of quick configuration tool. For details,
see ConfigTool User's Manual.

The figures shown in this section are for reference only, and the actual interface shall
prevail.
The default IP of the Camera is 192.168.1.108. Modify the IP address according to network
plan when you use the Camera for the first time or network is adjusted.
You can modify IP address individually or in batches by ConfigTool, or you can login web client
of the Camera to modify IP address.
 IP address can be modified individually when there are fewer devices or login passwords
of devices are different.

When there are multiple devices and device login passwords are the same, you can modify
IP addresses in batches.
Preparation

Acquire the ConfigTool setup package. If not, contact technical support.
 The PC which is installed with ConfigTool is interconnected with device through network.
3.1.1 Initializing Camera
It supports initializing cameras in the same LAN individually or in batches.
No operations can be done before device is initialized. Uninitialized devices will be displayed in
gray in the device list, and corresponding information of such devices will not be displayed on
other interfaces of ConfigTool.
Double-click the shortcut icon on the desktop. Step 1
Click . Step 2