19
Parameter
Note
User
Add users to the new group.
1. Press [User].
2. Press
in the pop-up interface.
3. Press
to enter user ID.
Repeat Step 2~ Step 3 and continue to add users. Max. 50 users can be
added.
4. Press
, and press [Yes] to save according to interface prompt.
Unlock
Mode
Select unlock mode, including card, fingerprint, password and face.
5. Press [Unlock Mode] to select the mode.
6. Press
, and press [Yes] to save according to interface prompt.
Valid User
The door can be unlocked after valid users unlock.
Valid user cannot be greater than total number of user.
When valid user equals to total number of user, the door can be unlocked
after all members of the group unlock.
When valid user is less than total number of user, the door can be
unlocked after any members of the group reach valid user.
Table 3-2
Press
. The screen prompts “Do you want to save settings?”
Step 3
Press [Yes] to complete group combination config.
Step 4
3.7
Lock Holding Time
After a card is swiped, the lock is kept open for some time and is closed automatically after the
time. The unit is second.
Select “Features > Lock Holding Time”, and the screen displays Figure 3-10.
Step 1