User’s Manual
1
1 Introduction
1.1 Overview
The alarm controller is a high performance anti-theft controller designed for the middle and small
alarm solution application. Adopting embedded Linux operation system and relying on embedded
platform, the system can run steadily with advanced controlling technology and strong data
transmission ability. The embedded design also supports the product with high security and
excellent stability.
The controller can work both independently and with professional app in mobile phone, which is
convenient for remote viewing and alarm status controlling. The product can also be connected to
the network to form the strong security monitoring network, working with the professional alarm
platform software to show the strong networking and remote monitoring ability.
The controller can be widely applied in the store, warehouse, family, and so on for security
protection.
1.2 Features
The functions might be different depending on the software and hardware version of the model you
purchased.
●
8 onboard wired zones.
●
Support 1-way siren control and 2-way MOS transistor output on the controller.
●
With the expansion module (consists of 8 input modules and 8 output modules), alarm input and
alarm output channels are increasing to 72 and 82 respectively.
●
Outputs operation follows system events, zone events, area, link and scheduling programs.
●
1 case tamper port for the alarm controller.
●
1 siren tamper input.
●
Up to 8 areas, and every area with 2 partitions.
●
Up to 8 keypads.
●
Up to 100 users with 8 authority levels for different users (supervisor, manager, master, user,
temporary, duress, patrol, and technician).
●
1000 events log.
●
Supports more than 11 zone types.
●
7 sorts of zone terminations, including closed-circuit (NC), open-circuit (NO), end-of-line (EOL)
resistors, double end-of-line (DEOL) resistors, triple end-of-line (3DEOL) resistors, inertial type for
vibration detector and pulse type for roller shutter.
●
Configurable zone resistance (2K7, 4K7, and 6K8).
●
With 2 RS-485 ports for keypads connection and extended connections.
●
With PSTN port for alarm event report function, supporting CID (Contact ID).
●
3 telephone numbers for monitor station (PSTN), 8 telephone numbers for vocal message, and 8
telephone numbers for SMS.
Summary of Contents for DHI-ARC3008C
