User’s Manual
273
Table 5-48
Recognized information
Parameter
Description
NIC Name
Displays the name of Ethernet card.
Network Type
Displays the network type. Different type represents different supplier.
APN
Displays the default APN number.
Dial-up No.
Displays the default dial No.
Authentication
Type
Authentication mode. You can select
PAP
,
CHAP
, or
NO_AUTH
.
Username,
Password
Enter the username and password for authentication.
Select the
Enable
checkbox.
Click
Dial
to start connecting.
After the connection is established, the result is displayed in the
Wireless Network
area.
Wireless network
Click
Apply
to complete the settings.
5.15.1.5
Configuring PPPoE Settings
PPPoE is another way for the Device to access the network. You can establish network connection by
configuring PPPoE settings to give the Device a dynamic IP address in the WAN. To use this function,
firstly you need to obtain the username and password from the Internet Service Provider.
Select
Main Menu > NETWORK > PPPoE
.
Summary of Contents for DH-XVR54 L-I2 Series
