User’s Manual
208
SMD
In the
Channel
list, select a channel, and then enable it.
Configure the parameters.
SMD parameters
Parameter
Description
Channel
In the
Channel
list, select a channel to set the motion detection.
Enable
Enable or disable the motion detection function.
Sensitivity
Set the sensitivity for smart motion detection.
Effective Target
Select human or motor vehicle or both.
Schedule
Define a period during which the motion detection is active.
Anti-Dither
Configure the time period from end of event detection to the stop of
alarm.
Alarm-out Port
Click
Setting
to configure the parameters.
General Alarm: Enable alarm activation through the alarm devices
connected to the selected output port.
External Alarm: Enable alarm activation through the connected
alarm box.
Wireless Siren: Enable alarm activation through devices connected
by USB gateway or camera gateway.
Summary of Contents for DH-XVR54 L-I2 Series
