User’s Manual
151
In the
Alarm Box
list, select the alarm box number corresponding to the address number
configured by the DIP switch on the Alarm Box.
In the
Alarm-in Port
list, select the alarm input port on the Alarm Box.
Configure the settings for other parameters of the Alarm Box.
Click
Apply
to complete the settings.
Click
Default
to restore the default setting.
5.10.2.3
Configuring Alarms from External IP Cameras
Select
Main Menu > ALARM > Alarm-in Port > CAM Ext
.
CAM ext
Configure the alarm input settings from the external IPC.
Click
Apply
to complete the settings.
Click
Default
to restore the default setting.
Click
Copy to
to copy the settings to other channels.
Click
Refresh
to refresh configured settings.
5.10.2.4
Configuring Alarms for IP Camera Offline
You can configure the alarm settings for the situation when the IP camera is offline.
Select
Main Menu > ALARM > Alarm-in Port > CAM Offline
.
Summary of Contents for DH-XVR54 L-I2 Series
