Web Interface
84
Table 7-16 IPC parameter description
Parameter Description
IPC Name The name of the IPC/NVR/XVR/HCVR.
IP
Address
The IP address of the IPC/NVR/XVR/HCVR.
Username The username and password for the Web interface of the
IPC/NVR/XVR/HCVR.
Password
Port
It is 554 by default.
Protocol
Select from
Local
and
Onvif
, you can select according to the device
you want to connect to the VTO..
Stream
Select
Main Format
or
Extra Format
as needed.
Main Format
: It has large bit rate value and image with high
resolution, but also requires large bandwidth.
Extra Format
: It has small bit rate value and smooth image, and
requires little bandwidth. This option is normally used to replace
main stream when bandwidth is not enough.
Channel
It you connect IPC to the VTO, the value is 1 by default.
It you connect NVR/XVR/HCVR to the VTO, configure the value to
the channel number of the IPC on the NVR/XVR/HCVR.
Click
OK
to finish configuration.
Step 3
7.10.3 Import Config
You can import IPC Information from local storage to the VTO.
Click
Import Config
, and then the
File Upload
interface is displayed.
Step 1
Click
File
, then select the .csv file you need,.
Step 2
Click
Upload
.
Step 3
Enter the password for the Web interface, and then click
OK
.
Step 4
7.10.4 Export Config
You can export the IPC information from the VTO to the local storage for future use.
Click
Import Config
.
Enter the password for the Web interface.
Publish Information
7.11
This function is displayed only when the VTO you are visiting works as SIP server.
If the VTO you are visiting works as SIP server, you can publish information to the VTH users,
and you can view the publish history in
System Config > Publish Information > History Info
.
