Parameter
Note
Realtime Monitor
It is the priority level of network video monitoring data packet.
Command
It is the priority level of non-monitoring data packet such as device
config and query etc.
Table 5-23
Step 3
Click "Save" to complete setting.
5.3 Set PTZ Function
Only tracking speed dome supports PTZ function setup.
5.3.1
Set Preset
Preset means that the camera can store location parameters such as PTZ pan angle, tilt angle and lens
focal length into the device, besides, it can quickly call these parameters when necessary and move the
PTZ and camera to this location.
Step 1
Select "Setup > PTZ > Function > Preset" and the system will display the interface of "Preset", which is
shown in Figure 5-42.
