Dahua DH-IPC-PDBW82041N-B360 Quick Start Manual Download Page 2

Quick Start Guide 

Foreword 

General 

This manual introduces the functions, configuration, general operation, and system 

maintenance of network camera. 

Safety Instructions 

The following categorized signal words with defined meaning might appear in the manual. 

Signal Words 

Meaning 

Indicates a medium or low potential hazard which, if not 
avoided, could result in slight or moderate injury. 

Indicates a potential risk which, if not avoided, could 
result in property damage, data loss, lower 
performance, or unpredictable result. 

Provides additional information as the emphasis and 
supplement to the text. 

Revision History 

Version 

Revision Content 

Release Date 

V1.0.0 

First release. 

August 2020 

About the Manual 

● The manual is for reference only. If there is inconsistency between the manual and the

actual product, the actual product shall prevail.

● We are not liable for any loss caused by the operations that do not comply with the manual.
● The manual would be updated according to the latest laws and regulations of related

jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our

official website. If there is inconsistency between paper manual and the electronic version,

the electronic version shall prevail.

● All the designs and software are subject to change without prior written notice. The product

updates might cause some differences between the actual product and the manual. Please

contact the customer service for the latest program and supplementary documentation.

● There still might be deviation in technical data, functions and operations description, or

errors in print. If there is any doubt or dispute, we reserve the right of final explanation.

● Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

● All trademarks, registered trademarks and the company names in the manual are the

properties of their respective owners.

● Please visit our website, contact the supplier or customer service if there is any problem

occurring when using the device.

● If there is any uncertainty or controversy, we reserve the right of final explanation.

Summary of Contents for DH-IPC-PDBW82041N-B360



















Reviews: