Installation 6
3.2
Installing Model B
Model B installation
Figure 3-5
Table 3-2 Installation item list
No.
Item
No.
Item
No.
Item
No.
Item
①
Mounting surface
②
Positioning map
③
Expansion bolt
④
Pedestal
⑤
Self-tapping screw
⑥
Dome
⑦
Locking screw
—
—
Drill screw holes (and the cable outlet hole if it needs to go through the mounting
Step 1
surface) on the mounting surface
①
as indicated on the positioning map
②
, and then
insert the expansion bolts
③
in the screw holes.
Loosen the locking screws
⑦
on the dome
⑥
, and then take off the dome
⑥
.
Step 2
Adjust the location of the pedestal
④
according to cable outlet requirement (top out or
Step 3
side out), and then pull the cable out through the mounting surface
①
or the side cable
tray.
Put in and fasten the self-tapping screws
⑤
to attach the device to the mounting
Step 4
surface
①
.
Connect the camera to power source and the XVR device, and then the live view
Step 5
screen is displayed.
Put the dome
⑥
back on and fasten the locking screws
⑦
.
Step 6
