Dahua DH-5208AN-4KL-X-8 User Manual Download

Page: 16 / 327

Getting Started

2.2.1 DH-XVR5108C-X/DH-XVR5104C-4KL-X/DH-XVR5104C-X/

DH-XVR4104C-X/DH-XVR4108C-X

1. Remove the screws to take

off the cover.

2. Fix the screws on the HDD

but do not fasten them.

3. Match the screws with

the holes on the DVR to

place the HDD.

4. Turn the DVR upside down

to see the screws and then

fasten them.

5. Use the HDD cable and

power cable to connect HDD

and mainboard.

6. Put back the cover and

fasten the screws.

Summary of Contents for DH-5208AN-4KL-X-8








































































































































































































































































































































Search results

Summary of Contents for DH-5208AN-4KL-X-8

Reviews:

Related manuals for DH-5208AN-4KL-X-8

Brands by name

Popular brands

Dahua DH-5208AN-4KL-X-8, User Manual

Search results

Summary of Contents for DH-5208AN-4KL-X-8

Reviews:

Related manuals for DH-5208AN-4KL-X-8

Brands by name

Popular brands