Local Configurations
224
Figure 5-217
Select the route.
2)
If there are several USB storage devices are connected to the Device, you can
select from the
Device Name
list.
Click Refresh to total space, free space and the file list in the selected USB
storage device.
In the case of insufficient capacity, click
to delete the needless files.
Click
New Folder
to create a new folder in the USB storage device.
Click
Apply
to save the route selection settings.
3)
The
Test
interface is displayed again.
Click
to start packet capturing and backing up.
Step 5
Only the data packet of one LAN can be captured at one time.
After capturing starts, you can exit the
Test
interface to perform other operations
such as web login and monitoring.
Click
to stop capturing.
Step 6
The backup data is saved in the selected route under the naming style "LAN
name-time.pcap." See Figure 5-218. You can open it by using Wireshark software.
