Local Configurations
174
Parameter
Description
Send Email
Select the
Send Email
check box to enable the system to send an
email notification when an alarm event occurs.
To use this function, make sure the email function is enabled in
Main Menu > NETWORK > EMAIL
.
Record Channel
Select the channel(s) that you want to record. The selected
channel(s) starts recording after an alarm event occurs.
The recording for intelligence event and auto recording function
must be enabled. For details, see "5.1.4.9 Configuring Recorded
Video Storage Schedule" and "5.9.1 Enabling Record Control."
PTZ
Click
Setting
to display the PTZ interface.
Enable PTZ linkage actions, such as selecting the preset that you
want to be called when an alarm event occurs.
To use this function, the PTZ operations must be configured. For
details, see "5.4 Controlling PTZ Cameras."
Post Record
Set a length of time for the Device to delay turning off recording
after the alarm is cancelled. The value ranges from 10 seconds to
300 seconds.
Tour
Select the
Tour
check box to enable a tour of the selected
channels.
To use this function, the tour setting must be configured. For
details, see "5.2.8 Configuring Tour Settings."
After the tour is ended, the live view screen returns to the view
layout before tour started.
Snapshot
Select the
Snapshot
check box to take a snapshot of the selected
channel.
To use this function, make sure the snapshot function is enabled
for
Intel
in
Main Menu > STORAGE > SCHEDULE > Snapshot
.
Video Matrix
Select the check box to enable the function. When an alarm event
occurs, the video output port outputs the settings configured in
"
Main Menu > DISPLAY > TOUR > Extra Screen
."
Not all models support this function.
The extra screen must be enabled to support this function.
Buzzer
Select the check box to activate a buzzer noise at the Device.
Log
Select the check box to enable the Device to record a local alarm
log.
Voice Prompts
Select to enable audio broadcast in response to a face detection
event.
Table 5-47
