Local Configurations
144
Parameter
Description
Send Email
Select the
Send Email
check box to enable the system to send an
email notification when an alarm event occurs.
To use this function, make sure the email function is enabled in
Main
Menu > NETWORK > EMAIL
.
Buzzer
Select the check box to activate a buzzer noise at the Device.
Log
Select the check box to enable the Device to record a local alarm log.
Voice Prompts
Select to enable audio broadcast/voice prompts in response to a user
account alarm event.
Table 5-43
Click
Apply
to complete the settings.
Step 3
5.11
AI Function
The faces are fuzzily processed to comply with relevant regulations.
AI module provides face detection, face recognition, and IVS functions. These functions take
effect after they are configured and enabled. It adopts deep learning and can realize precision
alarms.
Face detection: The Device can analyze the faces captured by the camera and link the
configured alarms.
Face recognition: The Device can compare the captured faces with the face library and
then link the configured alarms.
IVS: The IVS function processes and analyzes the person and vehicle images to extract
the key information to match with the preset rules. When the detected behaviors match
with the rules, the system activates alarms. The IVS function can avoid wrong alarms by
filtering the factors such as rains, light, and animals.
5.11.1 Face Detection
The Device can analyze the pictures captured by the camera to detect whether the faces are on
the pictures. You can search and filter the recorded videos the faces and play back.
Face detection function supports only four analog channels.
Face detection and IVS function cannot be enabled at the same time for the same channel.
5.11.1.1 Configuring Face Detection Parameters
The alarms are generated according to the configured parameters.
Select
Main Menu > AI > PARAMETERS > FACE DETECTION
.
Step 1
The
FACE DETECTION
interface is displayed. See Figure 5-132.
