User’s Manual
7
4
Live View
Open DH Thermal, you can see the live view from the device.
Figure 4-1 Live view
Table 4-1 Interface description
No.
Description
1
Live
: Connect the device to PC and see the live view from the device. The live view
displays information such as temperature of the center spot and time. You can take
snapshot and recording manually.
Setting
: Configure various function parameters. See "5 Configuration" for details.
Thermal Image
: Import and analyze heat maps.
2
Name of the connected device.
3
See help document and the version of the client.
4
Snapshot
: Take snapshot of the live view. The default path is "./Snapshot".
Record
: Click to start recording and then click again to stop. You can see the
recording time on the live view. The default path is "./Records".
5
Live view of the device.
Enable high temperature alarm, alarm recording and snapshot, and audible alarm.
When the temperature of the objects reaches the threshold, the device gives off the alarm sound,
and triggers alarm snapshot that will appear on the right side.
When the alarm sound stops, the alarm recording finishes.
