72
3.15.2
Importing Configuration File
You can import the configuration file that is exported from an access controller to another
access controller with the same model.
Log in to the web interface.
Select
Config Mgmt.
on the navigation bar.
On the configuration management interface, click
Browse
to select the configuration
file that you want to import, and then click
Import configuration
.
The access controller will reboot after importing configuration file.
3.15.3
Default
Restore Factory:
Reset all the data and configuration of the access controller.
Restore Factory (Save user & log)
: Reset all data and configuration, except for user
information and logs.
Upgrade
Export the configuration file for backup before upgrade, and then import it after the
upgrade is completed.
Make sure that the upgrade file has been obtained. You can get it from technical support.
Do not disconnect the power or network, or reboot or shutdown the access controller
during upgrade.
Log in to the web interface.
Select
Upgrade
on the navigation bar.
On the
Upgrade
interface, click
Browse
to select the upgrade file, and then click
Upgrade
.
Upgrade
If the upgrade is succeeded, the system pops up a message indicating that the upgrade
is completed. If the upgrade is failed, there will be corresponding prompts.