manualshive.com logo in svg

Dahua ASI6213J-FT, User Manual, Page: 36 / 107

Share
Download
Dahua ASI6213J-FT User Manual Download Page 36

29 

Parameter 

Description 

Debug Mode 

Enable this mode to display the temperature of the blackbody on the standby 
interface. You can correct the temperature of the blackbody accordingly. 

 

 

Only certain models support this function.

 

 

When this mode is enabled, the door cannot be opened by any method.

 

Temperature 
Display 

If enabled, temperature will be displayed in unlock results. 

Clear Captured 
Photos 

Delete all captured photos. 

Face Privacy 

If enabled, the standby interface will be covered in mosaic. 

2.13.2

 

Result Feedback 

There are 4 result feedback modes: Success/Failure, Only Name, Photo&Name, and 
Photos&Name. 
You can select a result feedback mode as needed. 

Photos&Name Mode 

The captured face image, the image saved in the face database, user ID, user name and time are 
all displayed during unlock. 

 

Photos and name mode (1) 

 

 

Summary of Contents for ASI6213J-FT












































































































Reviews:

No comments