17
IP address configuration
Table 2-5
IP configuration parameters
Parameter
Description
IP Address/Subnet
Mask/Gateway IP
Address
The IP address, subnet mask, and gateway IP address should be on the
same network segment. After configuration, tap
to save the
configurations.
DHCP
DHCP (Dynamic Host Configuration Protocol).
When the DHCP is enabled, the IP address can be automatically acquired,
and the IP address, subnet mask and gateway IP address cannot be
manually configured.
P2P
P2P is a private network traversal technology which enables user to
manage devices without requiring DDNS, port mapping or transit server.
Make sure that the computer used to log in to the web interface is in the same LAN with the
access controller.
2.10.2
Active Register
By active registering, you can connect the access controller to the management platform, and
then you can manage the access controller through the management platform.
Configurations you have made can be cleared on the managing platform, and the access
controller can be initialized, you need to protect the platform managing permission in case of
data loss caused by improper operation.
Log in to the
Main Menu
interface.
Select
Connection > Network >Active Register
.
Tap
to enable active register, and then configure parameters.
Table 2-6
Active register