Dahua ASI1212AD Page 25 User Manual Download

Page: 25 / 26

4.5.2 Alarm History

To view alarm history:

Step 1. In system info interface, press

【

↑

】

【

↓

】

key, select alarm history, and press

【

√

】

key.

Step 2. Press

【

↑

】

【

↓

】

key, user can view alarm history, including alarm type, alarm

time and etc as follows.

Note:

Max can display 512 records of history.

4.5.3 Local Info

To view local info:

Step 1. In homepage, press

【

↑

】

【

↓

】

key, select local info, and press

【

√

】

key. You

can view version, MAC, IP, Card Quantity, Super Password Quantity, Card History and

Alarm History in the shown interface.

Note:



This manual is for reference only. Slight difference may be found in user

interface.



All the designs and software here are subject to change without prior written

notice.



All trademarks and registered trademarks are the properties of their respective

owners.



If there is any uncertainty or controversy, please refer to the final explanation of

us.



Please visit our website or contact your local service engineer for more

Alarm History

Alarm Type Alarm Time

Duress            10-12 08:00
Door Sensor       10-12 08:43
Anti-pass        10-12 08:36
Anti-pass        10-12 08:43
Duress            10-12 08:45

Total 5 records Page 1/1

Summary of Contents for ASI1212AD



























Search results

Summary of Contents for ASI1212AD

Reviews:

Related manuals for ASI1212AD

Brands by name

Popular brands

Dahua ASI1212AD, User Manual

Search results

Summary of Contents for ASI1212AD

Reviews:

Related manuals for ASI1212AD

Brands by name

Popular brands