Figure 4-2 Mount the Access Controller to the wall
Step 9
Remove the protection film.
4.2 DIN Rail Mount
Procedure
Step 1
Attach the DIN rail to the wall with screws.
The DIN rail does not come with the Access Controller.
Step 2
Hook the lower DIN clip of the back panel onto the bottom of the DIN rail, slightly push
upwards the back panel, and then push the back panel backwards to hook the upper DIN
clip onto the top of the DIN rail.
Make sure the clips "grip" the rail on both the top and bottom of the rail.
If you want to remove the Access Controller from the rail, simply push upwards on the
DIN clip, remove the upper clip off the rail, and then lower the back panel to remove the
lower clip off the rail. No screwdrivers or special tools are required.
Quick Start Guide
22
