User’s Manual
6
5 Installation
Water leak detector supports all-in-one installation and split mount with screw or adhesive tape.
5.1 All-in-one Installation
You can adjust the height of the positive probe to adjust the sensitivity first, and then place the
water leak detector at a place where the water is likely to leak directly.
Step 1
Adjust the height of the positive probe with screw to adjust the sensitivity.
Figure 5-1 Adjust the height of the positive probe (1)
Figure 5-2 Adjust the height of the positive probe (2)
Step 2
Place the detector in a place where the water is likely to leak.