GUI Operations
9
2
GUI Operations
NOTE
Slight difference might be found on the interfaces of different models. Following figures are for
reference only. The actual product shall govern.
2.1
Booting Up
CAUTION
Before the boot up, please make sure:
The rated input voltage shall match with the device power requirement. Make sure the
power wire connection is ready and then turn on the power button.
For device security, connect the Device to the power adapter first and then connect it to the
power socket.
Always use the stable current with little ripple interference. It is recommended to use UPS.
Connect the Device to the monitor, plug into the power socket, and then press the power button
to boot up the Device.
2.2
Initializing the Device
NOTE
Only devices of some series support this function.
When booting up for the first time, you need to configure the password information for
admin
(by default). To guarantee device security, keep the login password for admin properly and
modify it regularly.
Turn on the Device.
Step 1
The
Device Initialization
interface is displayed. See Figure 2-1.
