Dahua Technology XVR4 Series User Manual Download

Page: 288 / 330

Local Configurations

275

Figure 5-254



Click

Details

or double-click the log that you want to view, the

Detailed

Information

interface is displayed. Click

Next

Previous

to view more log

information.



Click

Backup

to back up the logs into the USB storage device.



Click

Clear

to remove all logs.

5.21.3 Viewing Event Information

You can view the event information of the Device and channel.

Select

Main Menu > INFO > EVENT

, the

EVENT

interface is displayed. See Figure 5-255.

Summary of Contents for XVR4 Series











































































































































































































































































































































Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands

Dahua Technology XVR4 Series, User Manual

Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands