Table of Contents 282
Parameter
Description
Version
Select the check box of SNMP version(s) that you are using.
The default version is
V3
. There is a risk of select V1 or V2.
SNMP Port
Indicates the monitoring port on the agent program.
Read Community
Indicates the read/write strings supported by the agent program.
Write Community
Trap Address
Indicates the destination address for the agent program to send the
Trap information.
Trap Port
Indicates the destination port for the agent program to send the
Trap information.
Read Only User
Enter the user name that is allowed to access the Device and has
the "Read Only" permission.
Read/Write User
Enter the user name that is allowed to access the Device and has
the "Read and Write" permission.
Authentication Type
Includes MD5 and SHA. The system recognizes automatically.
Authentication
Password
Enter the password for authentication type and encryption type.
The password should be no less than eight characters.
Encryption
Password
Encryption Type
In the
Encryption Type
list, select an encryption type. The default
setting is CBC-DES.
Step 3 Compile the two MIB files by MIB Builder.
Step 4 Run MG-SOFT MIB Browser to load in the module from compilation.
Step 5 On the MG-SOFT MIB Browser, enter the Device IP that you want to manage, and then
select the version number to query.
Step 6 On the MG-SOFT MIB Browser, unfold the tree-structured directory to obtain the
configurations of the Device, such as the channels quantity and software version.
4.12.8
Multicast
When you access the Device from the network to view the video, if the access is exceeded, the
video will not display. You can use the multicast function to group the IP to solve the problem.
Step 1 Select
Main Menu > NETWORK > MULTICAST
.
The
MULTICAST
interface is displayed. See Figure 4-210.
