13
Icon
Description
Exit.
3.6.1 Configuring Presets
After configuring presets, the camera saves parameters (such as current status of PTZ pan/tilt, focus)
to the memory, so that you can quickly call these parameters and adjust the PTZ to the correct
position.
Procedure
Step 1
Set step length and turn the camera to the proper position with joystick or click the
direction buttons.
Step 2
Click
, and then click
to add the current position to be a preset.
3.6.2 Configuring Tour
Configure tour and the PTZ camera repeats performing tours among the configured presets after
configuration.
Procedure
Step 1
Click
.
Step 2
Configure tour number, and then click
OK
, the device starts tour.
Figure 3-8 Tour
3.6.3 Configuring Step Length
You can configure the rotation speed of the PTZ camera.
Procedure
Step 1
Click
.
Step 2
Select
Fixed step length
or
Variable step length
according to your needs.
3.6.4 Configuring Scan
Scan means the camera moves horizontally at a certain speed between the defined left and right
boundaries.