51
Figure 3-30
Place the aircraft on a flat surface, and click "Start Calibration".
The remote control will prompt "Calibration Success" if it is successfully calibrated.
The remote control will prompt "Calibration Failure" if it fails to calibrate. Click "Retry" till it
is successfully calibrated.
3.9.4 Initialization Failure
Abnormity Prompt
Both remote control and ground station prompt "Initialization Failure".
Possible Reasons
After power on and before taking off, it may result in initialization failure if you move the aircraft.
Solutions
Power on the aircraft again after the power is cut off, and keep the aircraft horizontal and static
during initialization. Please contact our company if initialization fails for several times.
3.9.5 Geomagnetic Abnormity
Abnormity Prompt
Aircraft indicator
●
●
●
flashes.
Both remote control and ground station prompt "Geomagnetic Abnormity".
Possible Reasons
Summary of Contents for NAVIGATOR X1550
