Home
/
Dahua Technology
/
IVSS Series
/
User Manual

Dahua Technology IVSS Series, User Manual, Page: 296 / 376

Share

Page: 296 / 376

Dahua Technology IVSS Series User Manual Download Page 296

User's Manual

276

HDD for single-HDD mode.

8.5.1.2.1 Creating RAID

RAID has different levels such as RAID5, RAID6 and so on. Different RAID levels have different data
protection, data availability and performance levels. Create RAID according to your actual
requirements.

Creating RAID operation is going to clear all data on these HDD. Be careful!

Procedure

Step 1

Click

, or click

on the configuration page, and then select STORAGE > Storage

Resource > RAID > RAID.

Figure 8-67 RAID (1)

Step 2

Click Add.

Figure 8-68 Create RAID (1)

Step 3

Set RAID parameters.
Select RAID creation type according to actual situation. It includes Manual RAID and Auto

«
...
294
295
296
297
298
...
»

Summary of Contents for IVSS Series

























































































































































































































































































































































































Reviews:

No comments