background image

Quick Start Guide 

Foreword 

General 

This manual introduces the installation and operation of network camera. Read carefully before 
using the device, and keep the manual safe for future reference. 

Safety Instructions 

The following signal words might appear in the manual. 

Signal Words 

Meaning 

 

Indicates a medium or low potential hazard which, if not avoided, 

could result in slight or moderate injury. 

 

Indicates a potential risk which, if not avoided, could result in 
property damage, data loss, lower performance, or unpredictable 

result. 

 

Provides additional information as a supplement to the text. 

Revision History 

Version 

Revision Content 

Release Time 

V1.0.3 

Updated the information of device dimensions. 

June 2022 

V1.0.2 

Updated the information of device dimensions. 

February 2022 

V1.0.1 

Updated "Important Safeguards and Warnings." 

April 2021 

V1.0.0 

First release. 

March 2018 

Privacy Protection Notice 

As the device user or data controller, you might collect the personal data of others such as their face, 
fingerprints, and license plate number. You need to be in compliance with your local privacy 
protection laws and regulations to protect the legitimate rights and interests of other people by 
implementing measures which include but are not limited: Providing clear and visible identification 
to inform people of the existence of the surveillance area and provide required contact information. 

About the Manual 

  The manual is for reference only. Slight differences might be found between the manual and the 

product. 

  We are not liable for losses incurred due to operating of the product in ways that are not in 

compliance with the manual. 

  The manual will be updated according to the latest laws and regulations of related jurisdictions. 

For detailed information, see the paper User Manual, use our CD-ROM, scan the QR code or visit 
our official website. The manual is for reference only. Slight differences might be found between 
the electronic version and the paper version. 

  All the designs and software are subject to change without prior written notice. Product updates 

Summary of Contents for IPC-HFW2831T-ZS-S2

















Reviews: