Dahua Technology IPC-HDW5842T-ZE Operation Manual Download Page 327

Page: 327 / 473

Operation Manual

Parameter

Description

Restricted Login

Set the PC address that allows the defined user to log in to the camera

and the validity period and time range. You can log in to the web page

with the defined IP in the defined time range of validity period.

●

IP address: You can log in to web through the PC with the set IP.

●

Validity period: You can log in to web in the set validity period.

●

Time range: You can log in to web in the set time range.

Set as follows
1. IP address: Enter the IP address of the host to be added.
2. IP segment: Enter the start address and end address of the host

to be added.

Step 4

Click

Apply

The newly added user is displayed in the username list.

Related Operations

●

click

to edit password, group, memo or authorities.

For admin account, you can only edit the password.

●

Click to delete the added users. Admin user cannot be deleted.

The admin account cannot be deleted.

6.7.2.1.2 Resetting Password

Enable the function, and you can reset password by clicking

Forget password?

on the login page.

For details, see "4.2 Resetting Password".

Procedure

Step 1

Select >

System

Account

User

Figure 6-73 User

Summary of Contents for IPC-HDW5842T-ZE


























































































































































































































































































































































































































































































Search results

Summary of Contents for IPC-HDW5842T-ZE

Reviews:

Related manuals for IPC-HDW5842T-ZE

Brands by name

Popular brands

Dahua Technology IPC-HDW5842T-ZE, Operation Manual

Search results

Summary of Contents for IPC-HDW5842T-ZE

Reviews:

Related manuals for IPC-HDW5842T-ZE

Brands by name

Popular brands