Dahua Technology IPC-HDW5842T-ZE, Operation Manual

Page: 180 / 473

Operation Manual
166
5.10.2.3.1 Modifying Face Information
Step 1 Go to the
Face Database Config
interface, set filtering condition as needed, and click
Search .
The search result is displayed.
Step 2 Select the row where the face picture or the personnel information is located, and then
click
or .
Figure 5-51 Face information modification
Step 3 Modify face information according to the actual need. Click
Add to task list
.
Step 4 Click , and then click OK .
5.10.2.3.2 Deleting Face Picture
Go to the Face Database Config interface, and delete the created face picture.
●
Single delete: Select the row where the face picture or the personnel information is located, and
click or to delete the face picture.
●
Batch delete: Select at the upper right corner of the face picture or of the row where
the personnel information is located. Select the information, click
Add to Deletion List
, ,
and then click OK to delete the selected face picture.
●
Delete all: When viewing face pictures in a list, click of the row where the serial number is
located; when viewing by thumbnail, select
All
to select all face pictures. Click
Add to Deletion
List , , and then click OK to delete all face pictures.
5.10.2.4 Face Modeling
Face modeling extracts face picture information and imports the information to a database to
establish relevant face feature models. Through this function, the face recognition and other